One-Sentence Definition: The LED Lift & Fold All-in-One Display is an integrated dual-folding, liftable, mobile smart display terminal developed by Spectrum Display for fast-paced stage rental, high-end conferences, and commercial roadshow markets. It deeply integrates a 135-inch LED giant screen, a multi-axis mechanical transmission system, and flight-case-based mobile deployment, truly enabling an “open-and-use” experience for stage display equipment.

Why Should a Screen Be Able to Lift, Fold, and Move? We Redesigned How LED Screens Are Used

Contents

• The “Fixed Installation” Dilemma of Traditional LED Screens

• The Real Pain Point in Stage Rental: Time Is Eating Into Profit

• How the LED Lift & Fold All-in-One Display Redefines “Installation”

• This Is Not Just a Screen. It Is a “Spatial Variable”

• Who Needs a Giant Screen That Can “Disappear”?

• Conclusion: From Fixed Installation to Mobile Expression

1. The “Fixed Installation” Dilemma of Traditional LED Screens

For a long time, LED displays followed only one usage logic:

fixed installation.

A screen is transported to the site. Steel structures are welded, cables are laid, modules are assembled, and seams are calibrated. Then it stays there permanently.

A banquet hall loses a complete wall.
An exhibition hall loses the possibility of spatial transformation.
A building loses room to “breathe.”

But what if a screen does not need to be permanently fixed?

What if it only needs to appear for two hours during a product launch, then be packed overnight and moved to the next city?

In the fast-paced markets of stage rental, high-end conferences, and commercial roadshows, construction time and onsite safety often determine whether a project succeeds or fails.

However, traditional large-screen equipment always faces the same installation nightmare: complex load-bearing trusses must be built in advance, heavy screen modules must be assembled and hoisted at height, and then time-consuming alignment and cabling must be completed.

This traditional working method directly exposes the industry’s biggest pain points:

complicated setup, high labor demand, and serious safety risks from overhead installation.

According to industry data, a traditional LED rental screen larger than 135 inches often requires 4 to 6 people working 6 to 8 hours from unpacking to powering on. For touring projects or events that need to move between venues on the same day, this time cost directly eats into profit.

It is this “fixed installation” dilemma that has triggered a redesign of how LED screens are used.

2. The Real Pain Point in Stage Rental: Time Is Eating Into Profit

In stage rental and touring projects, “time is money” is not a slogan. It is the rule that determines project profitability.

Pain Point 1: Slow Setup — A Labor-Heavy Job Starting from Several Hours

Traditional rental screens require onsite module assembly, cable connection, structural installation, and signal debugging.

Working at height is not only time-consuming, but also creates serious safety risks.

According to industry data, two people need around one hour to build a 20㎡ standard rental screen. For large screens above 135 inches, 4 to 6 people working 6 to 8 hours is common.

Pain Point 2: Difficult Transportation — Too Many Parts, Too Much Handling

After disassembly, large screens involve many separate parts and complicated packing.

All-in-one displays larger than 110 inches are often difficult to move through elevators and standard doorways due to their size, resulting in high logistics costs.

Traditional rental screens also need to endure frequent installation, dismantling, and transportation. Impact during transport is one of the main causes of equipment failure.

Pain Point 3: Safety Risks — Hidden Dangers in Overhead Hoisting

Traditional large screens require complex load-bearing trusses to be installed first. Heavy screen modules then need to be assembled and hoisted at height.

This kind of overhead work is time-consuming and brings significant safety risks.

The essence of these three pain points is the same: there is a fundamental conflict between the installation method of traditional screens and the event industry’s demand for efficiency.

3. How the LED Lift & Fold All-in-One Display Redefines “Installation”

To solve these industry pain points, Spectrum Display developed the LED Lift & Fold All-in-One Display.

Its core idea is simple:

Integrate the complex power structure and flexible display into an independent flight case, creating a true open-and-use solution.

Solution 1: Integrated Flight Case Design — No More Loose Parts

The screen, transmission system, and control system are deeply integrated into one mobile flight case.

The case size is 2135 × 1110 × 2220mm. The bottom is equipped with lockable universal wheels, supporting both forklift operation and manual pushing. It can move through standard doorways and elevators without access restrictions.

After arriving onsite, no complicated assembly or overhead installation is required.

Open the cover, connect the power, and it is ready to use.

From equipment arrival to a fully unfolded and lifted 135-inch giant screen, the entire process takes only minutes.

A task that traditionally required 4 to 6 people working 6 to 8 hours can now be completed by one operator within seconds.

Solution 2: 180° Dual Folding — Instant Opening with a 0.1mm Seam

Inside the compact flight case is a giant display with a panel size of 135 inches.

The two side screens open and fold through servo electric cylinders and Spectrum Display’s self-developed rotating hinge system, achieving 180° folding and unfolding.

When fully unfolded, the display area reaches 3000 × 1687.5mm.

The folding gap is controlled within 0.1mm. After unfolding, the three screen sections merge into a complete display surface, just like one seamless panel.

Solution 3: 0–900mm Intelligent Lifting — Adaptable to Any Viewing Angle

The system uses industrial-grade closed-loop servo electric cylinders combined with aluminum alloy and carbon steel guide rails to drive the screen smoothly in the vertical direction.

The lifting range is 0–900mm, allowing the screen to stop precisely at any height and meet viewing requirements in different scenarios.

It supports three control methods: physical buttons, remote control, and mobile APP.

Built-in preset modes, such as welcome mode, full-screen mode, and storage mode, can be called directly. Users can also customize lifting speed, folding angle, and opening timing through programming.

Solution 4: Smart Dual-System Design for True Integration

The device supports seamless switching between Android and Windows systems.

It can run meeting software, presentation content, or brand videos without an external media player.

The built-in hidden cabling system also eliminates the messy “cables everywhere” problem often seen in traditional rental screen setups.

The logic of traditional solutions is:

“Fast, but just usable.”

The logic of the LED Lift & Fold All-in-One Display is:

Fast, and refined.

4. This Is Not Just a Screen. It Is a “Spatial Variable”

The logic of traditional LED screens is “occupation.”

They occupy the wall, the sightline, and the visual presence of a space.

The logic of the LED Lift & Fold All-in-One Display is “release.”

It appears when needed and leaves when not needed.

This ability to disappear turns a screen from a fixed installation into a spatial variable for the first time.

One Space, Two Completely Different Expressions

In a star-rated hotel banquet hall, the screen can be folded into the flight case during the day. It does not block natural lighting or disrupt the refined interior design.

At night, it unfolds with one click. A 135-inch seamless giant screen instantly appears for wedding banquets, gala dinners, product launches, and corporate events.

The Ceremony Begins the Moment the Screen Unfolds

Unlike traditional screens that simply hang like a flat board, the unfolding process of the LED Lift & Fold All-in-One Display is itself a visual performance.

Programmable opening, folding, and lifting actions can be combined with countdowns, music, and lighting, instantly drawing the audience’s attention and turning product launches, VIP receptions, and event openings into high-impact ceremonial moments.

One Device, Multiple Scenarios

With universal wheels at the bottom and a compact folded size, this 135-inch giant screen can easily move between conference rooms, exhibition halls, and touring venues.

One team and one device can serve multiple events, reducing repeated equipment purchases and improving asset turnover.

5. Who Needs a Giant Screen That Can “Disappear”?

Target Customers

• Event planning companies and AV equipment rental providers

• Star-rated hotels and banquet hall owners

• Brand marketing departments and exhibition companies

• System integrators and stage designers

Spectrum Display has showcased this LED Lift & Fold All-in-One Display at InfoComm 2026 in Las Vegas, presenting this revolutionary fast-deployment solution to global system integrators, stage rental companies, and stage designers.

This appearance marks how China’s intelligent manufacturing strength in high-end commercial display is being seen by the global market.

6. Conclusion: From Fixed Installation to Mobile Expression

Why should a screen be able to lift, fold, and move?

Because commercial spaces should not have only one expression.
Because the event industry should not allow setup time to consume profit.
Because good equipment should not remain trapped in a warehouse simply because it cannot fit through the door.

Key Takeaways

1. The dilemma of traditional LED screens:
   Fixed installation, slow setup, 4 to 6 people working 6 to 8 hours, difficult transportation, and high safety risks from overhead hoisting.

2. The solution of the LED Lift & Fold All-in-One Display:
   Integrated flight case for open-and-use deployment, 180° folding with a 0.1mm seam, 0–900mm intelligent lifting, and Android/Windows dual systems.

3. This is not just a screen. It is a spatial variable:
   It creates impact when in use and disappears neatly when idle.

4. Core specifications:
   135 inches, 3000 × 1687.5mm display area, 1920 × 1080 resolution, and P1.56 pixel pitch.

5. Target scenarios:
   Product launches, exhibition rental, star-rated hotel banquet halls, stage performances, and commercial pop-ups.

Recommendations for Event Planners and Rental Companies

• Re-evaluate your equipment turnover rate. How many events can one device serve in a year? The LED Lift & Fold All-in-One Display can help significantly improve this number.

• Do not only look at purchase cost. Look at total cost of ownership. Labor, transportation, storage, damage, and downtime are hidden costs that often exceed the equipment price itself.

• If your business involves frequent venue-to-venue movement, such as tours or multi-location events, the LED Lift & Fold All-in-One Display is not merely an option. It is the answer.

• To learn more about product details or request a customized solution, contact Spectrum Display through:
  www.spectrumdisplay.cn